 |
| Quantity: | |
|---|---|
JDFR
Zhongke
8479820000
F-EMS can be applied in continuous casting of steel, achieving the effect of improving steel quality. It is installed at the final stage of solidification zone of the strand.
Coils are made of high quality sintered wire, which are characterized by high resistance to flushing, water and high temperature;
Three--dimensional analysis software of modern computer is adopted to process optimum design on the distribution space of electromagnetic field inside the mould, so as to make the distribution of electromagnetic field of EMS be more reasonable and the generated magnetic field force be more efficient;
Under the premise of meeting the requirement of the EMS installation, the stirring scope of EMS is designed to be increased as far as possible. It can not only increase the effective working height of magnetic field in the EMS, make magnetic field distribution more homogeneous, but also improve the molten steel stirring force and extend the stirring time, creating conditions for further improving the casting speed and increasing output;
High quality silicon steel is adopted for the iron core, which increases the intensity of magnetic field inside the EMS and improves the iron core saturation of EMS, at the same time decreases the consumption of EMS itself.
Technical parameters of FEMS | |||||||
| No. | Model | Voltage V | Current A | Frequency Hz | Flow m³/h | Dimension mm （In. Dia./Out. Dia*H） | Weight kg |
| 1 | DJFR-340S | 460 | 200 | 1-20(17) | 15 | φ340/φ640×820 | 918 |
| 2 | DJFR-380S | 400 | 500 | 7-9(9) | 15 | φ372/φ670×700 | 825 |
| 3 | DJFR-430S | 400 | 600 | 2-11(8.5) | 20 | φ420/φ720×750 | 917 |
| 4 | DJFR-480S | 400 | 600 | 1-20(6.5) | 25 | φ480/φ700×850 | 873 |
| 5 | DJFR-520CE | 400 | 600 | 7.3 | 2.4（coil）+6（shell） | φ520/φ910×790 | 1395 |
| 6 | DJFR-540S | 500 | 600 | 4-10(6) | 25 | φ540/φ822×826 | 1084 |
| 7 | DJFR-620CH | 500 | 600 | 8 | 4（coil）+7（shell） | φ616/φ1030×790 | 2355 |
| 8 | DJFR-630S | 400 | 800 | 6.8 | 30 | φ630/φ1000×999 | 1778 |
| 9 | DJFR-750S | 500 | 800 | 6 | 28 | φ750/φ1100×835 | 2011 |
| 10 | DJFR-770S | 159 | 550 | 9 | 30 | φ770/φ1040×1000 | 2037 |
| 11 | DJFR-800S | 460 | 800 | 6 | 30 | φ800/φ1154×985 | 2208 |
| 12 | DJFR-880S | 360 | 1200 | 6 | 50 | φ880/φ1200×1000 | 2211 |
| 13 | DJFR-1000S | 370 | 550 | 3-5 | 50 | φ1000/φ1299×1000 | 2450 |
| 14 | DJFR-330CE | 400 | 400 | 7-12（10） | 1.2（coil）+4（shell） | φ328/φ692×600 | 877 |
| 15 | DJFR-360CE | 400 | 700 | 9 | 2.2（coil）+6（shell） | φ350/φ740×650 | 1018 |
| 16 | DJFR-380CE | 400 | 450 | 9 | 1.2（coil）+4（shell） | φ370/φ750×600 | 1018 |
| 17 | DJFR-430CE | 400 | 700 | 4-10(8) | 1.3（coil）+5（shell） | φ430/φ802×820 | 1323 |
| 18 | DJFR-470CE | 500 | 600 | 8 | 2.1（coil）+5（shell） | φ470/φ870×770 | 1131 |
| 19 | DJFR-540CE | 400 | 600 | 6.5 | 2.4（coil）+6（shell） | φ540/φ900×770 | 1394 |
| 20 | DJFR-570CE | 500 | 700 | 1-16 | 5（coil）+6（shell） | φ570/φ970×658 | 1506 |
| 21 | DJFR-620CH | 500 | 600 | 8 | 4（coil）+7（shell） | φ630/φ1030×630 | 2355 |
| 22 | DJFR-670CH | 500 | 600 | 3-8 | 7（coil）+9（shell） | φ670/φ1080×630 | 2578 |
| 23 | DJFR-685C | 500 | 600 | 5-9(7) | 4（coil）+7（shell） | φ685/φ1090×650 | 2009 |
| 24 | DJFR-800CH | 500 | 800 | 6 | 5（coil）+8（shell） | φ896/φ1425×600 | 2355 |
| 25 | DJFR-1100CH | 500 | 800 | 1-10(6) | 7（coil）+11（shell） | φ1096/φ1610×650 | 3900 |
F-EMS can be applied in continuous casting of steel, achieving the effect of improving steel quality. It is installed at the final stage of solidification zone of the strand.
Coils are made of high quality sintered wire, which are characterized by high resistance to flushing, water and high temperature;
Three--dimensional analysis software of modern computer is adopted to process optimum design on the distribution space of electromagnetic field inside the mould, so as to make the distribution of electromagnetic field of EMS be more reasonable and the generated magnetic field force be more efficient;
Under the premise of meeting the requirement of the EMS installation, the stirring scope of EMS is designed to be increased as far as possible. It can not only increase the effective working height of magnetic field in the EMS, make magnetic field distribution more homogeneous, but also improve the molten steel stirring force and extend the stirring time, creating conditions for further improving the casting speed and increasing output;
High quality silicon steel is adopted for the iron core, which increases the intensity of magnetic field inside the EMS and improves the iron core saturation of EMS, at the same time decreases the consumption of EMS itself.
Technical parameters of FEMS | |||||||
| No. | Model | Voltage V | Current A | Frequency Hz | Flow m³/h | Dimension mm （In. Dia./Out. Dia*H） | Weight kg |
| 1 | DJFR-340S | 460 | 200 | 1-20(17) | 15 | φ340/φ640×820 | 918 |
| 2 | DJFR-380S | 400 | 500 | 7-9(9) | 15 | φ372/φ670×700 | 825 |
| 3 | DJFR-430S | 400 | 600 | 2-11(8.5) | 20 | φ420/φ720×750 | 917 |
| 4 | DJFR-480S | 400 | 600 | 1-20(6.5) | 25 | φ480/φ700×850 | 873 |
| 5 | DJFR-520CE | 400 | 600 | 7.3 | 2.4（coil）+6（shell） | φ520/φ910×790 | 1395 |
| 6 | DJFR-540S | 500 | 600 | 4-10(6) | 25 | φ540/φ822×826 | 1084 |
| 7 | DJFR-620CH | 500 | 600 | 8 | 4（coil）+7（shell） | φ616/φ1030×790 | 2355 |
| 8 | DJFR-630S | 400 | 800 | 6.8 | 30 | φ630/φ1000×999 | 1778 |
| 9 | DJFR-750S | 500 | 800 | 6 | 28 | φ750/φ1100×835 | 2011 |
| 10 | DJFR-770S | 159 | 550 | 9 | 30 | φ770/φ1040×1000 | 2037 |
| 11 | DJFR-800S | 460 | 800 | 6 | 30 | φ800/φ1154×985 | 2208 |
| 12 | DJFR-880S | 360 | 1200 | 6 | 50 | φ880/φ1200×1000 | 2211 |
| 13 | DJFR-1000S | 370 | 550 | 3-5 | 50 | φ1000/φ1299×1000 | 2450 |
| 14 | DJFR-330CE | 400 | 400 | 7-12（10） | 1.2（coil）+4（shell） | φ328/φ692×600 | 877 |
| 15 | DJFR-360CE | 400 | 700 | 9 | 2.2（coil）+6（shell） | φ350/φ740×650 | 1018 |
| 16 | DJFR-380CE | 400 | 450 | 9 | 1.2（coil）+4（shell） | φ370/φ750×600 | 1018 |
| 17 | DJFR-430CE | 400 | 700 | 4-10(8) | 1.3（coil）+5（shell） | φ430/φ802×820 | 1323 |
| 18 | DJFR-470CE | 500 | 600 | 8 | 2.1（coil）+5（shell） | φ470/φ870×770 | 1131 |
| 19 | DJFR-540CE | 400 | 600 | 6.5 | 2.4（coil）+6（shell） | φ540/φ900×770 | 1394 |
| 20 | DJFR-570CE | 500 | 700 | 1-16 | 5（coil）+6（shell） | φ570/φ970×658 | 1506 |
| 21 | DJFR-620CH | 500 | 600 | 8 | 4（coil）+7（shell） | φ630/φ1030×630 | 2355 |
| 22 | DJFR-670CH | 500 | 600 | 3-8 | 7（coil）+9（shell） | φ670/φ1080×630 | 2578 |
| 23 | DJFR-685C | 500 | 600 | 5-9(7) | 4（coil）+7（shell） | φ685/φ1090×650 | 2009 |
| 24 | DJFR-800CH | 500 | 800 | 6 | 5（coil）+8（shell） | φ896/φ1425×600 | 2355 |
| 25 | DJFR-1100CH | 500 | 800 | 1-10(6) | 7（coil）+11（shell） | φ1096/φ1610×650 | 3900 |
