News Center
You are here: Home » News Center

splitting in-roll electromagnetic stirring

The articles shown below are all about the splitting in-roll electromagnetic stirring, through these related articles, you can get relevant information, notes in use, or latest trends about the splitting in-roll electromagnetic stirring. We hope these news will give you the help you need. And if these splitting in-roll electromagnetic stirring articles can't solve your needs, you can contact us for relevant information.
  • 2023-09-04
    We present a segmented coupling model for slab casting by roller electromagnetic stirring(R‐EMS) of electromagnetic, flow, heat transfer, and solidification behavior based on magnetohy‐drodynamics and solidification theory. A three‐dimensional (3‐D) segmented coupling model that included electromagnetic, flow, and heat transfer elements was established using Ansoft Maxwell and ANSYS Fluent software. The effects of the roller sleeve, magnetic shielding ring, coil, core, mol‐ ten steel, and air domain on the electromagnetic, thermal and flow fields were studied numerically.
  • 2024-05-07
    Introduction to Electromagnetic StirringAn electromagnetic stirrer (EMS) is a device that uses magnetic fields to induce currents within molten metal, creating a stirring action without any physical contact. This method is particularly useful in processes like continuous casting, where maintaining t
  • 2021-08-19
    The mechanism of electromagnetic stirring for continuous casting is to strengthen the movement of residual molten steel in the strand by means of the electromagnetic force generated by the electromagnetic stirrer, which can change the flow, heat transfer and material migration process during
  • 2021-08-19
    Keywords: roller electromagnetic stirring (IN-ROLL EMS); Fe–17 wt% Cr–0.6 wt% Ni steel; solidification structure; number of pairs for rollers; washing effectAbstract: We present a segmented coupling model for slab casting by roller electromagnetic stirring (In-roll EMS) of electromagnetic, flow, hea
  • 2021-06-04
    The slab continuous casting machine was put into use for the first time with a splitting in-roll electromagnetic stirring technology device. The splitting in-roll electromagnetic stirring was used in the secondary cooling zone to replace the original support roller, and the principle of electromagne
 
Zhongke Electric is committed to R&D and providing complete solution for electromagnetic metallurgy, as well as on-line heating system for continuous rolling.

Navigation

Product Category

Contact Us

  Contact Person: Eric Wang
  Tel: +86-730-8688890
  Phone: +86-15173020676
  E-mail: wangfp@cseco.cn
 Copyrights 2021 Hunan Zhongke Electric Co., Ltd. All rights reserved. Supported by Leadong.