 |
| Quantity: | |
|---|---|
Zhongke
Increase equiaxed grain ratio, and improve strand(such as bloom, thick plates, etc.) quality;
Extend continuous casting time, stabilize and improve casting speed, which can improve casting yield and production efficiency;
Casting at constant temperature can avoid solidification too early, which is beneficial for avoiding accidents, such as accretion, freezing, returning to tundish, stopping casting, etc.
Decrease cracks and steel breaking out.
Decrease tapped temperature of furnace or ladle by about 10-20℃, which is beneficial for energy-saving and refractory saving;
Reduce tapping time, improve casting speed, decrease problems of casting cannot be continued caused by ladle temperature too low.
Heating temperature rise capacity: reheating rate 1-2℃/min.
Temperature control capacity:Temperature control accuracy is ±3℃ of target temperature(±2℃ after operation stabilized);
Initial temperature control mode can decrease tapping temperature of ladle molten steel by 10-20℃.
| Technical parameters sheet of tundish induction heating system | ||||
| No. | Item | Technical parameters | ||
| 1 | Type | Structure with upper and lower iron core separated | ||
| 2 | Cooling method | Compound cooling method of air cooling + Aerosol cooling | ||
| 3 | Voltage | 2400V | ||
| 4 | Power | 1200-1600KW | ||
| 5 | Frequency | 40~150HZ adjustable frequency conversion | ||
| 6 | Phase | Single phase | ||
| 7 | Insulation Class | Class C | ||
| 8 | Self weight of the inductor body | The total weight is about 4000kgs | ||
Increase equiaxed grain ratio, and improve strand(such as bloom, thick plates, etc.) quality;
Extend continuous casting time, stabilize and improve casting speed, which can improve casting yield and production efficiency;
Casting at constant temperature can avoid solidification too early, which is beneficial for avoiding accidents, such as accretion, freezing, returning to tundish, stopping casting, etc.
Decrease cracks and steel breaking out.
Decrease tapped temperature of furnace or ladle by about 10-20℃, which is beneficial for energy-saving and refractory saving;
Reduce tapping time, improve casting speed, decrease problems of casting cannot be continued caused by ladle temperature too low.
Heating temperature rise capacity: reheating rate 1-2℃/min.
Temperature control capacity:Temperature control accuracy is ±3℃ of target temperature(±2℃ after operation stabilized);
Initial temperature control mode can decrease tapping temperature of ladle molten steel by 10-20℃.
| Technical parameters sheet of tundish induction heating system | ||||
| No. | Item | Technical parameters | ||
| 1 | Type | Structure with upper and lower iron core separated | ||
| 2 | Cooling method | Compound cooling method of air cooling + Aerosol cooling | ||
| 3 | Voltage | 2400V | ||
| 4 | Power | 1200-1600KW | ||
| 5 | Frequency | 40~150HZ adjustable frequency conversion | ||
| 6 | Phase | Single phase | ||
| 7 | Insulation Class | Class C | ||
| 8 | Self weight of the inductor body | The total weight is about 4000kgs | ||
